Photo Restore LabBring old photographs back to life
Get Photo Restore free

Bring old photographs back to life

How to date a Polaroid

A Polaroid's format, border and back printing narrow its decade before anyone has to guess from the picture itself, because the film and the camera that made it both changed on a known timeline.

By Fable · 22 October 2026 · 8 min read

Photograph: Lindsey Garrett / Pexels

A Polaroid looks like one thing from across the room: a small square snapshot with a wide white strip along the bottom. Up close, that is only true of one era of Polaroid film, and the differences between the eras are exactly what let you date a print without knowing anything about who is in it.

Identify the format first

Polaroid made several genuinely different kinds of instant film over its history, and they do not all look alike.

Pack film is the oldest format likely to turn up in a family collection, made from the 1960s through the 2000s. It is a rectangular print, peeled apart from a negative sheet that was discarded once the image developed, which is why pack film prints are comparatively rare to find today. Many people threw the negative away and kept only the print, and the print itself has a fairly even, narrow white border on all four sides rather than one deep strip.

SX-70 film, introduced in 1972, is the format most people picture when they hear the word Polaroid. It is square, and it is the format that gave Polaroid its signature look: a deep white strip along the bottom, proportionally much wider than the thin margin on the other three sides. The print develops itself in daylight once ejected from the camera, with no peeling and no discarded negative.

600 film arrived in 1981 for a new generation of cameras built around flash photography. It shares the SX-70’s square shape and the same wide bottom strip, so the two are easy to confuse by sight alone. The back printing is usually what tells them apart, since 600 film packs are marked as such rather than carrying SX-70 branding.

Spectra film, sometimes sold as Image film, arrived in 1986 and is noticeably wider and more rectangular than SX-70 or 600, with its own border proportions. It is far less common in an average shoebox than the square format, because Spectra cameras were a smaller share of what people actually bought.

If what you are holding is square with a deep bottom border, you are almost certainly looking at SX-70 or 600 film. If it is rectangular with an even border, it is pack film. If it is wide and rectangular, it is Spectra.

The border carries more evidence than the picture does

Once you know the format, the border itself is worth a closer look, because Polaroid changed small details of it across the decades. Limited edition and novelty borders, in colours other than plain white, start appearing from the late 1990s onward, well after the classic era, so a coloured or patterned border is itself a dating clue toward the later end of Polaroid’s history rather than the earlier end.

Original Polaroid film production stopped in 2008 when the company’s last factory closed. Instant film using old Polaroid stock and equipment came back from 2010 under new ownership, first called the Impossible Project, then Polaroid Originals from 2017, then simply Polaroid again from 2020. Each relaunch changed the back design and sometimes the exact dye set, so a Polaroid print with noticeably different chemistry, or a back that does not match the classic decades, may well be a newer print rather than an old one, even if someone shot it on a vintage camera. That gap matters most for anyone trying to work out whether a print found loose in a drawer is genuinely decades old or a recent recreation.

What the back actually tells you

The back of a Polaroid is where the clearest, least ambiguous dating evidence lives, because it is printed text rather than a judgement call.

The logo. Polaroid’s rainbow stripe logo, four coloured bars beside the wordmark, was introduced in 1969 and stayed in use for roughly three decades before the company moved to plainer branding. A rainbow stripe logo on the back of a print is a reasonably strong sign of that window. A different logo design points either earlier, to pack film’s first years before the rainbow stripe existed, or later, to the company’s various post-2000 rebrands.

The film type, printed in small text. Pack film carries a type number, printed along the image edge itself, such as Type 107 or Type 669. Integral SX-70 and 600 film backs are usually marked with the film name directly. This single piece of text is often the most reliable thing on the whole print.

The weight and thickness. SX-70 and 600 film packs contained their own flat battery sealed inside the cartridge, which is why a stack of original integral prints feels slightly heavier and stiffer than you might expect, and why old packaging sometimes mentions the battery specifically. Modern i-Type film, made for current Polaroid cameras since 2016, drops that battery because the camera supplies its own power, so an i-Type print is a touch lighter. It is a small thing, but it is a genuine, checkable difference rather than a guess.

Combine the format, the logo, the printed film type and the border style, and most family Polaroids narrow down to a specific decade with reasonable confidence, in the same way the mount tells most of the story on a cabinet card from a century earlier.

Why Polaroids age differently, and what that means for restoring them

An ordinary colour print is made by exposing light-sensitive paper through a processed negative, and it carries three separate dye layers that age at different rates. That uneven fading is why so many old colour snapshots turn orange as one dye outlasts the others.

A Polaroid is a different kind of object. The image forms and lives inside a sealed sandwich of chemical layers that never gets separated from a negative, because there is no negative to separate it from. As that sandwich ages, the whole thing tends to shift together, usually toward yellow or a pink-magenta cast rather than the strong orange typical of a faded chromogenic print. The bigger physical risk is not colour loss on its own but delamination, where the layers of the sandwich begin to separate at an edge or corner, sometimes showing as a bubble, a crack, or a patch where the surface has lifted entirely. Our page on faded and darkened photos covers the colour side of this in more general terms, but the surface cracking is specific to integral instant film and is worth treating as a warning sign rather than cosmetic wear.

The practical upshot is honest and a little urgent. A colour shift can usually be corrected well once you scan the print, because the image information is still present even after the balance between layers has drifted. A cracked or lifting surface is physical damage, and scanning now, before it spreads, is the only thing that actually protects the image behind it.

Scanning a Polaroid without fighting the format

Polaroids are thicker and glossier than an ordinary photographic print, which makes them behave slightly differently on a flatbed scanner than the prints most scanning advice is written for.

Expect more glare. The glossy integral surface reflects light directly back at the scanner’s sensor more than a matte print does, so check the preview for hot spots before you commit to a full scan, and adjust the print’s position rather than relying on software to fix a blown highlight afterward.

Scan the whole card, border included. The border is part of the object’s dating evidence, not wasted space to crop away. Keep it in the master scan and crop a separate copy later if you want an image without it.

Pick a resolution that respects the real image size. A Polaroid’s image area is smaller than most prints people scan, so our photo scan pixels tool is worth running before you start, and the scan settings reference has archival guidance by print size if you are not sure what to choose. Scanning at too low a setting on a small original wastes the one chance to capture detail that a tiny print never had much of to begin with.

Dated, scanned and backed up, a Polaroid stops being a fragile chemical object with an uncertain shelf life and becomes a file with a known decade attached to it, which is the entire point of working out when it was made.

Common questions

How do I know if I actually have a Polaroid and not another instant film?
Check the border and the back. A genuine Polaroid print from the SX-70 or 600 era has a glossy square image with a noticeably deep white strip along one edge only, and the back is a stiff grey or white card, often with a small printed logo. Kodak and Fujifilm instant prints use different border proportions and print their own brand name on the back, not Polaroid.
What is the fastest way to date a Polaroid?
Work through three things in order: the format (rectangular pack film, square SX-70 or 600, or wide Spectra), the logo and copyright text on the back, and the colour and condition of the dyes. Together they usually place a Polaroid within a specific decade, sometimes tighter.
Why do Polaroids fade or yellow differently from other old colour photos?
An integral Polaroid is a sealed sandwich of chemical layers, not a print made from a processed negative. As it ages the whole sandwich shifts colour together, usually toward yellow or pink, and the layers themselves can separate or crack at the edges. Ordinary colour prints fade because one dye layer degrades faster than the others, which is a different mechanism with a different look.
Can a faded or cracked Polaroid be restored?
On a scan, the colour shift can usually be corrected well, because the image information is still there even once the balance between layers has drifted. The physical print itself cannot be chemically reversed, and a cracked or delaminating surface is physical damage that scanning works around rather than fixes. Scan it at a good resolution before the surface gets any worse.